Ht-instruments MACROTEST G3 Manual de usuario Pagina 64
- Pagina / 108
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
MACROTESTG3 - COMBIG3
EN - 63
11Drive the auxiliary rods into the ground keeping to the distance instructions provided by the
standards (see § 12.12.1).
12Connect the alligator clips to the auxiliary rods and to the installation under test
according to Fig. 26, Fig. 27, Fig. 28 or Fig. 29.
13
Press the GO/STOP key. During this whole stage, do
not disconnect the measuring leads of the instrument
from the system under test. The symbol is shown on
the display for the entire duration of the test.
For earth resistance measurement in TT/IT systems,
in case of positive result, the screen to the side is
displayed by the instrument. It contains the value of
contact voltage in the secondary display, the value of
contact resistance of the voltage probe (Rs) and the
value of contact resistance of the current probe (Rh).
Press the SAVE button or touch the icon to save
the measurement (see § 7.1).
14
For earth resistance measurement in TT systems, in
case of negative result (see § 12.7), the screen to the
side is displayed by the instrument. It contains the
value of contact voltage in the secondary display, the
value of contact resistance of the voltage probe (Rs)
and the value of contact resistance of the current probe
(Rh).
Note the presence of the measurement result
highlighted in red.
Press the SAVE button or touch the
icon to save
the measurement (see § 7.1).
15
For earth resistance measurement in IT systems, in
case of negative result (see § 12.8), the screen to the
side is displayed by the instrument. It contains the
value of contact voltage in the secondary display, the
value of contact resistance of the voltage probe (Rs)
and the value of contact resistance of the current probe
(Rh).
Note the presence of the measurement result
highlighted in red.
Press the SAVE button or touch the icon to save
the measurement (see § 7.1)
- MACROTESTG3 – COMBIG3 1
- 2. GENERAL DESCRIPTION 6
- 3. PREPARATION FOR USE 8
- 4. NOMENCLATURE 9
- 5. GENERAL MENU 11
- 6. OPERATING INSTRUCTIONS 13
- 37
- value 75
- 9. MAINTENANCE 82
- 10. TECHNICAL SPECIFICATIONS 83
- 11. SERVICE 88
- 12. THEORETICAL APPENDIXES 89
- Selective S 93
- Measured voltage U 94
- CAUTION 100
- 2 > Z1) 102
Relacionado con productos y manuales para Herramientas Ht-instruments MACROTEST G3
Herramientas Ht-instruments GEO416 Manual de usuario
(116 paginas)
(116 paginas)
Herramientas Ht-instruments HT21 Manual de usuario
(17 paginas)
(17 paginas)
Herramientas Ht-instruments HT7051 Manual de usuario
(35 paginas)
(35 paginas)
Herramientas Ht-instruments HT157 Manual de usuario
(68 paginas)
(68 paginas)
Herramientas Ht-instruments HT210 Manual de usuario
(19 paginas)
(19 paginas)
Herramientas Ht-instruments HT307 Manual de usuario
(11 paginas)
(11 paginas)
Herramientas Ht-instruments HT309 Manual de usuario
(13 paginas)
(13 paginas)
Herramientas Ht-instruments HT322 Manual de usuario
(16 paginas)
(16 paginas)
Herramientas Ht-instruments HT32 Manual de usuario
(23 paginas)
(23 paginas)
Herramientas Ht-instruments HT326 Manual de usuario
(21 paginas)
(21 paginas)
Herramientas Ht-instruments HT327 Manual de usuario
(21 paginas)
(21 paginas)
Herramientas Ht-instruments HT3310 Manual de usuario
(16 paginas)
(16 paginas)
Herramientas Ht-instruments HT4000 Manual de usuario
(15 paginas)
(15 paginas)
Herramientas Ht-instruments HT3320 Manual de usuario
(30 paginas)
(30 paginas)
Herramientas Ht-instruments HT39 Manual de usuario
(24 paginas)
(24 paginas)
Herramientas Ht-instruments HT401 Manual de usuario
(24 paginas)
(24 paginas)
Andrea Electronics NC-121 manuals
Owner’s manuals and user’s guides for Headphones Andrea Electronics NC-121.
We providing 1 pdf manuals Andrea Electronics NC-121 for download free by document types: User Manual
Comentarios a estos manuales