Ht-instruments HT210 Manual de usuario descargar pdf (Pagina 9)

HT210

EN - 8

4.3.2. AC Voltage measurement

CAUTION

The maximum input for AC voltage is 600V. Do not attempt to measure

higher voltages to avoid electrical shocks or damages to the instrument.

Fig. 3: Using the instrument for AC voltage measurement

1. Switch on

Hz%

. “AC” symbol is displayed

2. Insert the test leads into the jacks, the red plug into VΩTempHz%CAP jack and

black plug into COM jack (see Fig. 3)

3. Connect the test leads to the circuit under test; the voltage value is displayed

4. If the message "O.L" is displayed the higher range is reached

5. Pressing the Hz% key until the symbols “Hz” or “%” are shown at display to meaning

the readings of frequency or duty cycle associated to voltage AC value

6. For HOLD function and Relative measurement please refer to paragraph 4.2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Sin comentarios

Ht-instruments HT210 Manual de usuario Pagina 9