Ht-instruments HT4011 Manual de usuario descargar pdf (Pagina 12)

HT4011

EN – 11

4.3.4. Resistance measurement

CAUTION

Before attempting any resistance measurement, remove power from the

circuit under test and discharge all capacitors, if present.

Fig. 5: Use of the clamp for Resistance measurement

1. Select the position 

2. Insert the red cable into input terminal V

CAPHz%Temp and the black cable into

input terminal COM.

3. Position the test leads in the desired points of the circuit to be measured (Fig. 5). The

display shows the value of resistance.

4. If the symbol “O.L” is displayed, this indicates overload status.

5. To use the HOLD function, please refer to § 4.2.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Sin comentarios

Ht-instruments HT4011 Manual de usuario Pagina 12